...bobbin assembly. (Do not shake the bobbin assembly up and down). When the tension is right, the bobbin assembly should fall slowly and as you stop the movement, the assembly should stop. The ...
...bobbin assembly. I am restoring this machine. I took out the hook and bobbin assembly to clean. Now I can't figure out how to put it back in. My daughter has a Singer 7033 machine. The thread tangled ...
...bobbin. Check that tension assembly for anything that could be stuck in it, preventing the assembly from putting tension on your thread, such as another thread. Wiggle the disc on the assembly ...
assembly fell out when I was changing the bobbin. Ooo ouch! sounds like you have a pretty bad timing problem and or a damaged bobbin case. Since it is a baby lock I would suggest taking it
...bobbin assembly The assembly keeps popping out. I thread the machine and pull up the bobbin thread but when I start to stitch the bobbin bunches, the needle breaks and then when I open the bobbin ...
...the bobbin will not wind. This whole assembly seems so flimsy! the machine should be checked by a sewing machine technican to see what wrong with the bobbin winder, the assembly may need to be ...
Question about 2263 Simple 23-Stitch Sewing Machine
bobbin assembly in singer 2263 need to put bobbin assembly back together www.threadsmagazine.com/item/4731/preventive-sewing-machine-maintenance/page/all and http://shesasewingmachinemechanic.blogspot
Question about PE770 Embroidery-only Machine with 5" x 7" Hoop SizeBuilt-in Memory, USB port, 6 lettering fonts and 136 built-in designs
...hook behind bobbin assembly If thread is getting wrapped behind the bobbin assembly, most likely your machine needs service as thread behind the bobbin assembly should not be a normal occurrence.
Question about PE770 Embroidery-only Machine with 5" x 7" Hoop SizeBuilt-in Memory, USB port, 6 lettering fonts and 136 built-in designs
...bobbin assembly loose and turn your hand crank and move it until the hook is at the top. Pull assembly apart and clean the assembly with qtip and sewing machine oil. It will likely be dirty that is ...
Question about PE770 Embroidery-only Machine with 5" x 7" Hoop SizeBuilt-in Memory, USB port, 6 lettering fonts and 136 built-in designs
bobbin assembly and carefully replace it and ensure it is locked in with the straight metal spring that is on the right side of the assembly. The assembly has to be with bobbin holder to the rear. The
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions