Questions & Answers for: bmw engine rattle

...light comes on engine shuts down, let it cool, then right again for a couple of minutes,am at my wits end for a solution>>HELP please. what oil is recommended foe bmw e34 with m20

...bmw 3 series repaired because of starting problem.now I have rattling sound from the engine when I accelerate but it goes quiet when cruising.help please. something is loose start with the exhaust ...

...engine head and the radiator, it is making a rattling sound at high idle lots of parts, alternator, water pump, a/c compressor lower area . many of them are on the serpentine belt. the pulleys and ...

...bmw 540i noise in front of engine was told it was vanos seals, was told by bmw it had a sealed vanos unit, what else could it be if it's rattle kind of noise , possible cause :VANOS or chain guide. ...

...BMW R1200CL. Almost every time I crank the engine I can hear the valves rattle. I have checked and adjusted the valve clearances to spec. The rattle goes away after the engine starts, but sometimes ...

engine gets hot a rattle develops. Williams BMW Manchester have suggested it could be exhaust header pipes problem but I have had them tested elsewhere with a camera inside them and been told there is

BMW 325i Rattling / vibrating and iddle drop at 2000 RPM and 40 MPH I have a 325ci with automatic transmission. It runs perfectly, both engine and transmission (does not feel that it has 147,000 miles

engine rattled My engine rattled but with clutching in it went off. That is not the engine rattling. That is the gearbox bearings that need to be replaced. There is also a cushion drive in the gearbox

...engine? I have a BMW 325xi 2001: Makes a loud rattling noise in engine. Sounds like some thing is loose. When I drove faster it sounded like a metal whirl with rattle. I took it to a mech. and was ...

...bmw 650i 2012 model n63 engine has streatched timing chain was there a campaign or recall for this U need a bew one if its rattles when starting..do it bfore u ruin engine. Hav guides tensioners done ...