bmw 316i overheating we removed thermostat completely as it was getting stuck from the bmw that has cooling problems, changed radiatior, water pump and checked heads Also check the radiator cap. If ...
...316i 1.6 how to take off the water pump? thank you for help Dis-connect battery, drain coolant, remove fan & radiator cowling ( fan coupling has a left hand thread ) undo 4 x retaining bolts in water ...
...BMW 316i How do I remove the radiator from the two top clips of the BMW 316i hi, the two clamps that secure the radiator have a small slot on the top, if you insert a small screwdriver into the slot ...
...316i e36 bmw open the bonnet remove the black plastic over on top of the grill and this reveals the back of the grills so you can push themout from behind and not damage the paint. Good luck ...
bmw 316i overheating we removed thermostat completely as it was getting stuck from the bmw that has cooling problems, changed radiatior, water pump and checked heads where can i find the water pump on
...BMW 1998 316i Auto is getting me frustrated. We purchased the car not long ago. It was obvious that the previous owner hadn't serviced it often. Anyway at first the heater wasn't working - only a ...
bmw 316i, water pump removal remove the radiator to have better access. remove all the belts now here is the hard part you need to make your own tool or buy the bmw tool to hold the fan belt pulley by
...bmw 316i check coolant level,make sure it has antifreeze in ,if ok then quick fix is to put card in front of rad like a blind,watch ice road truckers ,as for oil leak take it back to garage ,also ...
...bmw 316i They are both on the same side as the belt. You have to remove the fan and belts and the coolant as well. As you will see in the photo I have uploaded the thermostat housing. You remover the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
