Questions & Answers for: bluetooth blinks red amp blue

...blinks red and blue. Set your phone to search for a new headset or bluetooth device. When it finds the headset, the passcode shoudl be 0000 Not knowing witch head set or phone I can say turn on the ...

...blinks red three times and doesn't connect I found a guide that tells you what the different colors and lengths of flashes mean. Have a look for yourself. It seems like you have a low battery by how ...

...blinks an alternating red & blue. Then using your CU920.... 3. Turn Bluetooth ON, 4. Search "New Device," 5. Under "devices found" select your headset. 6. Select "Add." The CU920 will ask for a ...

...bluetooth fully dies and repair by holding the Ant button then waiting for it to stay steadily blue/purple or blink red/blue and search for it from your phone OR 2) Hold down the + & - volume ...

...is discoverable. any ideas? start with it off, hold down power button in front till it blinks red & blue(about 7-10 sec.) and then enter the pass code *0000* and it should work, it did for

...red and blue, use the phone menu to search for Bluetooth devices and select "260 Plantronics." When prompted for passkey, enter 0000. For the Plantronics M2500 (discontinued): Start with the headset ...

...amp; not getting connected ..i got connected once ...after that it is not happening RED indication light shows that the device needs charging.But if you think something is wrong with your headset a ...

...bluetooth till you see lights blinking red & blue or its blinking red only on some jawbones , that check your phone , it should show u a jawbone bluetooth discovered on device than hit connect or ...

...Bluetooth device list after the searching process. 3. You will be asked to enter a pin code to complete the pairing. Enter 1234 and confirm. (Note: the 1234 is a default pin code pre-stored in the ...