Questions & Answers for: kawasaki ZXR 750 blue rubber band

Question about 1992 ZXR 750

1 Answer

rear brake problem zxr750 put second hand reconditioned brake caliper on rear and it will not bleed up to give pressure does any one know if it has to be pressue bled?thanks jigs hey there,, just ...

Ad

how to remove carburetors on 1981 kz750e8 motorcycle do i have to remove moter to pull carbs hello mate,, your anserw is no ,,u dont need to remove the motor mate,, just take tank and air box off ,, ...

Ad

...5" hanging on barely by only 1 whire. the 4 wires going to it are: red, black, yellow, and black W/ blue stripe. i cant find this on the wire schematics in the manual, and i have no idea which wire ...

...the time you can start to feel heeat it starts smoking. At idle I can really tell if its white or blue but when I rev it its definately blue. After I shut the bike off the tailpipe continues to ...

...the wires inside the headlight housing. The wires are color coded; white to white, black to black, blue to blue, etc. Look for loose and disconnected wires and fittings. Find the headlight switch ...

how do you access battery to put in new one 1993 how do you access battery to put in new one 1993 zxr 750 L1? remove seat battery should be in the middle remove rubber strap,undo both cables pull ...

speedometer cable heating up and melting the rubber covering when the ignition is turned on the speedometer cable heats up and is melting the outer insulation. I also have a problem where when i try ...

Question about 1990 ZXR 750

1 Answer

HI CAN YOU GIVE ME THE PART NO FOR THE CAM CHAIN GUIDE RUBBER IN THE TOP OF THE CAM COVER FOR A 1994 ZXR750 L2 Cam chain guide PN# 12053-1286

Question about 1994 ZXR 750

2 Answers

where do i find the carbs ona 1994 ninja zx7r The Carburetors (4 of them) are located at the rear of theengione cylinder barrels, in order to access/see them you must remove the bikes fairings. First ...

Question about 1994 ZXR 750

1 Answer

I have a 1999 Kawasaki Zx750, i recently left gas it in it to long and had to clean out the carbs and fuel lines.. put it all back together, starts and runs fine till you go after 5k rpm then it brake

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...