Questions & Answers for: Ford Five Hundred blown fuse

...fuse box may be blown. Have located the fuse box The fuse box you need is under the dashboard to the left of the steering wheel. The fuse you need is F2. It is next to the bottom one on the far left. ...

Ad

Question about 2007 Five Hundred Limited Sedan

1 Answer

...FUSE BLOWN, WHICH FUSE IS IT? Internal lights went out after i tried to change a blown lamp, shorted live wire, on lamp unit, to chassis. Can't find which fuse supplies power to lamps, no mention in ...

Ad

blown except the 10amp one under the dash Fuse panel is under the instrument panel to the left of the steering wheel. These are listed in order of probability: The fuse you are looking for is F15 (10A

Question about 2006 Five Hundred

1 Answer

I have not taillights at all I would recommend that you check the fuse panel. You probably have a blown fuse. If not then check the bulbs.

you can always do as i would do and find location of auto fuse panel box and check for a blown fuse, under print instrument lights or gauges, because more than likely it is a fuse that needs replacing

blown fuse, faulty relay or pressure switch or ac clutch. Bypassing the electric problems run wire frm battery With a fuse in the middle then to compresser but only tapping into them then putting a on

Question about 2005 Five Hundred

1 Answer

problem with my ford five hundred fuse fuse to the starter has blown twice in the last month. Starter relay was also replaced but fuse still blown. Might be a grounding issue checck your connections

gauges dont work and back up lights come on when damp out has been happening for awhile getting worse Have you checked out the fuses to see if one is blown?

Question about 2007 Five Hundred Limited Sedan

1 Answer

...fuse, have had the alternator bench tested and it tested out good, there is also 2 fuseable links in the wiring for the alternator. One of thos could be blown. You could have a wiring problem and the ...

meter want read anything on my 2007 ford five hundred cannot get a reading on the code reader Check the fuses you might have a blown fuse that powers up the data link.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...