Questions & Answers for: blown front door speaker

...front speakers . They are all blown accept the left pass. door. Or better yet ,how much to have them replaced. You have to remove the door panels and as for the price-your better off buying ...

...blown and i want to replace them. This is a partial solution to let you know that the door panels for both the front and rear speakers have to be removed,, See repair manual for removing the door ...

...front works but not the left. either the wires in the boot where door folds open has broken wires in it or the most likely case you have 2 blown wolfers and 1 blown tweeter. common for cars with the ...

...front speaker has blown. I was just wondering the procedure (preferably visual) how to replace the speaker. Thanks Does speaker have an external cover on it, on the outside of door panel? if yes, ...

...sure it's not blown out. This can be done by using your fade & balance button on the radio and going to front speaker and left side only and to see if the speaker is blown. if so replaced ...

...front left drivers side and back door right side are blown no noise. So what is the problem? Is it a fuse, faulty wiring? When I got brand new speakers i hooked them into the broken speaker ports and ...

...front driver door speaker very faint . the two in the dash and both back doors not working at all. Is there a external Amp and where is it, to check connectios? What else should I be looking for. ...

...front door handles. The main speaker on the driver's side door isn't outputting any noise at all. Either that speaker is not connected or, the speaker is blown. To test: Disconnect that speaker from ...

...are 2 speakers on the rear door panels, 2 on the front and two tweeters by the front door handles. The main speaker on the driver's side door isn't outputting any noise at all. its blown or ...

...blown door speakers in a 2006 buick lucerne I have a 2006 Buick Lucerne w/o the Harmon Kardon sound. I am actually trying to learn the safest way to get the front door panels off so I can replace the ...