Question about 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
...Normal" light blinks, and the time display shows two horizontal lines. Nothing else works and the unit will not power on. All switches appear to be working (door, float) and I have changed out the ...
Question about 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
...NORMAL WASH and RINSE ONLY button lights constantly flashing. No other buttons respond. Is this worth fixing? The blinking buttons indicate the buttons are bad. The console will have to be
...key sequence to clear the blinking? Close dishwasher door press "Hi-Temp Wash" press "Energy Saver Dry" press "Hi-Temp Wash" press "Energy Saver Dry" run the 'normal' cycle without the hi temp ...
Question about 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
...normal cycle and cancel button lights are blinking on my kitchenaid dishwasher. Model # KUDP02CR8S2 Any suggestions? Probably a keypad gone bad. Try replacing the keypad. There is a troubleshooting ...
Question about 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
control panel cancel light blinking as well as normal and light china light cannot cancel or start dishwasher where do i connect the upper rack water conduit tube for the kitchenaid dishwasher
Question about 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
light. There are a few things to check before resetting the control. -The unit not being level so both door switches do not make contact - The sump plugged up so water is not pumping across the heater
Question about 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
...normal cycle light and cancel light both blinking. Dishwasher wont start Hi, Thanks for writing to Fixya.com. Please do the following to reset the washer. Normally the clean light sometimes flashes ...
Question about 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
...panel, one after the other, three times in succession, as in heavy duty-normal-light/china-heavy duty-normal-light/china-heavy duty-normal-light/china. All lights on the panel should then ...
Question about 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
...blinking. Dishwasher won't start. Press these keys : Heated Dry----> Normal-----> Heated Dry-----> Normal All the l.e.d.s should lite up and then, if you push start, it will go from function ...
Question about 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
...Normal cycle light blinking and if pressed, the Cancel light also blinks. I had disconnected it from power for several minutes and nothing. Can it be reset? The blinking usually happens when your ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions