Questions & Answers for: Buick Century blinking light

Question about 1992 Century

1 Answer

...blinking, or are they not on at all? If the bulbs are good, and they aren't on, it's the bulb socket problem. Get fine sandpaper, fold it around a pencil eraser, sand off any gunk or corrosion inside ...

Ad

Question about 1999 Century

1 Answer

...light blinking 97 buick lesabre 3800 check engine light blinking during exceleration only You may have a bad spark plug wire or plug, if that doesnt solve the problem it could be the ignition

Ad

Left turn signal does not blink on my 1996 Buick Century. The light is on steady in both front and back but it won't blink. The right turn signal works fine, although it seems to be slower than usual.

...light blinking. I charged the AC, turned off the low tire light and the change oil soon light. The AC clutch wouldn't cycle so I disconnected the bat. for a few minutes after that it wouldn't start i ...

Why don't the turn signals blink on my 1996 buick century? all turn signal lights, front and back, light up however. They just don't blink This means you have a faulty relay. The relay is what causes ...

...light and the blinkers are still blinking fast. When I put the turn signals on both the rear blinkers blink but the front blinkers only come on but don't blink. I replace both the front blinker ...

light is blinking on my buick century 2003 and the engine is making a noise If your check engine light is blinking it is trying to tell you that there is something wrong with your engine and/or engine

if i turn on my right turn signal it blinks real fast but my left on blinks normal check all lights on right side if one is taken out of loop remaining will blink faster also check that they,re not in

My blinkers do not work. I changed the relay, now they blink fast. changed burnt out buld, no change. my blinker, blink fast. both front sides at the same time. back ok. turn on the lights and all the

Question about 2002 Century

2 Answers

...light is blinking & u have a good ground it has to be the connection from the bulb to socket. Test the ground side of the circuit , bad ground ! Voltage drop testing is the way to a fix . ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...