Questions & Answers for: blinker fuse

...flip blinker the brake light shuts off on which ever side you have your blinker on for. flasher located at bottom of fuse box its round bout the size of a pop bottle lid,hazard flasher located at ...

...blinker fuse is a shiny square "odd" looking push in fuse. i believe it has a small aluminum casing on the fuse itself. but.... it could also be a fuse relay witch is located under the hood on the ...

Blinker and Hazard light fuses My blinker and hazard light fuses blew. I replaced them, checked wiring. No breaks in wiring. Blinker light would stay on solid, but now, it does NOTHING! Is there a ...

...fuse you need a bulb for the left rear light. why doesnt my left blinker work on my 1999 dodge caravan?the hazards work but the blinker dont. checked fuses there all good, right blinker works no ...

fuse but they do run off the same blinker. Try turning on the key, click the left/right (check both) turn signal and then operate the 4 ways on and off at the same time. Work the 4 way switch back and

fuse doesn't normally shoot. It could also be a faulty blinker control switch on your stirring colume. Flasher you should find an round flasher in your fuse box. Application: With 2 terminals Notes: (

...of thinking it might be a fuse I checked all my fuses in my fuse box relays all the fuses are good except for the fuse that might be sitting on top of the blinker I don't know what it's for it ...

...fuse. If the blinker stays on and does not flash, still can be bad flasher or fuse or a ground problem, You would then have to check the wires around area where there contact to the tail light ...

blinker fuse??? Back signal lights dont work, no blinkers in front, tail light stays on. WHY!! Just replaced the regulator and it didn't work- still blew a new fuse. My sportster keeps blowing the

...blinker fuse bought a blinker relay plug in and don't know where to put it the manual in your glovebox should have detailed info on the fuses. sometimes there will be a relay plug on the fuse panel ...