Questions & Answers for: Oldsmobile Cutlass Supreme bleeding brakes

brakes are nil Get yourself some plastic fish tank air line tubing. Loosen the bleeder and leave a box wrench on bleeder. Warm up the plastic tube in hot water and force it over bleeder end. place the

brakes on 1994 cutlass keep running tight the brakes on my 94 olds cutlass keep self tighten. I can stop car pump brakes 40 times and drive car sometimes 20 miles, sometimes less than 5. I hav bleed ...

...it but when i tried to bleed i cannot get any fluid out of either rear cylender would power bleeding fix the problem have you tried gravitiy bleeding yet? if not try that and see what happens

brakes replaced master and proportional valve try bleeding from the master cylinder I dont understand your question are you wanting to bleed your brakes? you need to people to do this ..... one person

It feels like only one of my brakes is working on my 87 cutlass supreme. Do I need to bleed the brakes? 1987?? i think it might need more than a bleed ,sounds like they are siezed up but i could be ...

...brakes? Step by Step: Make sure the person in the drivers seat applies adequate pressure, when another person opens the bleed valve. Step 1: First make sure you have plenty of brake fluid and do not ...

...brake backing plate 1 bleeder on each side. 2 in front 1 bleeder on each side on the caliper. when bleeding start with rigth rear left rear front rigth frontleft . check master cylinder fluid level ...

i cant get the brakes to bleed through the abs system what could be the problem ? You have to have the engine running on all vehicles,abs or not,to bleed the brakes You do not open any abs ...

removed through bleeding, so if you opened yup the system you must have a shop with the proper tool do the bleeding. There is no way to bleed the brakes at home using conventional brake bleeding means

free online chilton manual having brake issues, replaced rear brakes and calipers, bleed, drove for a week brakes went out. now cant bleed rear brakes, no fluid will come out, have tried using vaccum ...