Questions & Answers for: Audi A4 black bar

...need to replace it but cant seem to figure out how hi there the easiest way is to remove the lower black cover 2xscrews then with aplastic spreader locate the 2 tabs that hold black cover to mirror ...

...bar (bracket) that holds the power steering pump broke, do you guys know what audi or vw is compatible to search for this part? audi 4 quattro 1998 2.8 V6 manual thanks for the help. Any comparable ...

Audi A4 fuel filler wont open and no release lever it looks as if the bar inside is stuck even when car open soke fittings with brake fluide for several mins should do the trick

...black bar that is the mounting bracket. It is only clipped in place on the plastic outer casing. the black metal bar is attached with 2 shoulder screws. these probably just worked themself loose nad ...

anti theft lock code on radio will not reset. I put incorrect unlock code in 2 times, the manuel says wait 1 hour and I will be able to try again, the radio dial reads "safe: and there are 2 bars in ...

HOW DO I REPLACE THE SERPENTINE BELT ON MY 2.8 V6? HOW DO I REPLACE THE SERPENTINE BELT ON MY1998 A4 2.8 V6? WHAT DO I NEED TO REMOVE TO EVEN GET AT IT? DO I NEED ANY SPECIAL TOOLS?? joecoolvette must

have a raddelling noise in the front suspension Audi A4 have a raddelling noise in the front suspension everytime i hit a bump or cracks on the road not sure if its the front struts or somthing else i

i have an audi a4 estate 2006 where do i plug in the tow bar wiring, i do have the proper kit thanks should be underneath the bumper at the rear. You will have to get down on the ground.

acceleration hesitation Rough idle,hesitation on acceleration,sometime dies CHECK FUEL PRESSURE MUST BE 3.0 BARS AND MUST NOT DROP UNDER 2 .0 BARS AFTER 10 MINUTES.LET ME KNOW IF U NEED MORE INFO AND ...

how do i remove and replace the c.v. axles in my 2004 audi outie With a little difficulty. Google online for the video, but I'd have to know your exact car model, A4, A6, A8, whatever. Why are you ...