Questions & Answers for: Rotary black

I have agents rotary quartz with the number 3081 stamped on the back. the watch is oblong with a black black face and gold lettering and a date box. and gold intergrated strap. Would you please be ...

...2way dimmer which has a common,l1 and l2.when ive removed the old switch there are 5 wires-2 red,a black,a blue and a yellow,on the old switch one red was common,one red and black were in the ...

...A four way switch has four or five screws on it depending on its manufacturing date. Usually, 2 black, 2 gold, (and one green if the switch was manufactured after 2003). There should be four hot ...

How to remove the chuck of Black & Decker Drill BD154R? How to remove the chuck of BD154R? I want to replace the chuck of Black & Decker model BD154R. Please tell me how? Thanks You need to ...

...so I don't know which wire goes where. One dimmer (Trimatron 6683) has four wires green/red and red/black, the other dimmer has two black and one green. the wall has 3 black and one red. any help ...

...pole dimmer switch I'm trying to install. It has two hard connectors (screws) on the top and one black wire on the bottom. The switch I am replacing had just two hard wires (both black) attached.

...manufacturere has back red and green. How do I connect to existing travelers. If the new one has black, red and green, then it must not be a 3-way. Green is universally the ground and the black

how do i set the two faces of a rotary relelation watch i can set the time of the black face but cannot change the time/date on the white face What happens when you pull out the button when viewing ...

i have a black and decker rotary hammer drill i can only read 3 numbers of the model it is 045 but its the last three sn number 0481121 under pat 3309541 need parts manuel for Your one sounds like ...

rotary switch black red and blue wires replacing old switch with black, red and brown. I can't remember the wire sequence. What's hot what's not. For a old pole lamp with 3 bulbs Without seeing the ...