Questions & Answers for: bike seems switching gears even

Question about 1994 VT 600 C Shadow

1 Answer

...seems that you may have a faulty side stand switch. the side stand needs to be in the up position before the bike can be started off in gear. but if not the side stand contains a saftety switch that ...

Ad

Question about 2006 V Star 1100 Classic

1 Answer

bike with kicksand up and in gear with clutch in but will not turn over. all lights work and does not seem to be the battery. where is the starter relay, and is that even my problem. any help would be

Ad

Question about 1997 CBR 900 RR Fireblade

3 Answers

...even with the bike in gear, and the clutch lever out. The bike will start in gear with the clutch lever out. i dont understand, the bike shouldent start in gear with the lever out it would jump ...

Question about 1993 FXR Super Glide

1 Answer

...bike backwards and forwards, try to shift the transmission though all the gears. If it shifts through the gears there, you have a clutch problem if it will not shift though all the gears, you have a ...

...gears, with bike running and stationary, after shifting in to first gear hard to shift into neutral without tuning off power to bike. The bike has a slightly bent shift fork. The repair is a pretty ...

gears not working right,wont go into first gear goes straight back into 2nd even though its 1st on the gear shifter on handle bars turned screws on the 's' not made any difference can you help

Question about 1997 YZF Thunder ace 1000 R

0 Answer

bike will not roll, even with the clutch pulled in. Maybe this is normal? But anyway, I was riding straight into a parking spot, tried to shift to neutral and hit the kill switch thinking I could just

Question about 2000 Sunfire

2 Answers

...switching gears. When the gears do switch, they switch very smoothly. Going up hills cause the RPM's the skyrocket since the car will refuse to switch into a higher gear. I can go up a small ...

...even before this it seemed as though the bike always wanted to lunge forward. Are you using the correct 10W40W wet clutch motorcycle oil? It has special friction modifiers in it for this clutch drag ...

...bike seems to grab and make a clunk noise, once rolling no problems Leak from where clutch cable enters housing, problem only after starting bike in neutral or placing bike in neutral Older 4 speed ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...