Questions & Answers for: Harley Davidson FXDL Dyna Low Rider bike frames measured

Question about 2001 FXDL Dyna Low Rider

1 Answer

...off. Hi ..... Charge the battery fully, take a reading (good battery 12.5 - 12.8) and start the bike, Place a multi meter across the battery, with the bike running it should show a reading of

Ad

Question about 2000 FXDL Dyna Low Rider

1 Answer

engine match bike? wandering about Bike. inherited a 1977 low rider. has belt drive from a sturgis model, primary cover says 80 c.i. but i'm not sure if the engine was changed. the original engine on ...

Ad

Question about 2003 FXDL Dyna Low Rider

1 Answer

...rear wheel alignment. For something as serious as wheel alignment within the frame, I'd take the bike to a dealer somewhere and have them check it out. On some bikes, there is supposed to be an ...

Question about 2003 FXDL Dyna Low Rider

1 Answer

how to install a solo seat on a vintage harley davidson motorcycle On most vintage bikes, the seat is supported by a "T-bar" that connects to the frame between the fuel tanks on the front end and is ...

Question about 2003 FXDL Dyna Low Rider

1 Answer

Want to confirm the bike side anchor point of the spring. Looks like a small mushroom head post about parrelel to the pivot point of the kick stand That's it, the frame sping anchor.

Question about 2003 FXDL Dyna Low Rider

1 Answer

...tray done like this. Remove the seat. Then look at the battery cover on the right side of the bike. Now, look just a bit to the rear of the bike on the frame and you may see two bolts. These

Question about 2003 FXDL Dyna Low Rider

1 Answer

...you buy them. I'm not absolutely certain but this is what I think you need. If you look at your bike now, you'll see that you have what we call "mid-mount" controls. Look a the foot peg support ...

Question about 2003 FXDL Dyna Low Rider

2 Answers

...it on a isolant cover to avoid contacts. 3- there are two bolts to free, on the right side of the bike. You must unscrew the vertical bolt, and only loosen the horizontal bolt. Next, the battery ...

Question about 2008 FXDL Dyna Low Rider

1 Answer

...a ratchet and Allen driver. Lift the rear of the seat up and slide the seat toward the rear of the bike to disengage the seat from the frame and remove it from the bike. 2 Don a face shield and ...

...a ratchet and Allen driver. Lift the rear of the seat up and slide the seat toward the rear of the bike to disengage the seat from the frame and remove it from the bike. 2 Don a face shield and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...