Questions & Answers for: CCM bike frames measured

...turning the engine. 10, pour another 1/2 litre in, refit the filler cap important don't run the bike without the filler cap in place...more oil on the floor! run the bike for five minutes switch ...

Stand for the bike I need a stand for my bike. What stand will work the best? Almost any cheap and cheerful MX lift stand.

Spedometer Anyone changed the speedo on their 604 with one off another bike? Mine is reading way out due to different tyre size and i really need a trip meter. Seen a few nice cheap ones on ebay but ...

...out all the baffels in the stock pipes and was wondering what would happen if i didnt get the bike rejected. the bike runs good its just it back fires due to me busting the pipes out but i can ...

ccm float levels and jet numbers, bike running to rich!!!! very choppy when running slowly around town! bike surges when at slow speeds , but no prob when opened up try dropping the slid needle , ...

No spark at the plugs Suzuki engine R30 Had not started bike for a month, work abroad tried to start bike turned over but did not fire. Checked fuses, wiring, ignition switch etc . Took bike to the ...

I've recently had a problem with getting my bike started, i have managed to get it to start now, but it can only be started with the choke fully open and if i try to close the choke it cuts out. (Even

it hold the oil in the frame on this bike .should the oil be inbetween the markers on the dipstick? bottom mark is low oil and top mark is full , so top mark is the answer !

ccm tl 125 fork seals how do i know what size to buy?? normally if you remove the seals carefully there are numbers printed on them and also you can measure the outside diameter and measure the fork ...

flhtc oil change Can anyone help me about changing the oil or anything else about oil on this bike.... in simple language please as it is not my bike but that of a friend who is Greek ...