Questions & Answers for: best replace rear main seal

Question about 1998 Windstar

1 Answer

...up dont fit but can be modified to fit. your best bet is go to a junk yard because the rear seats are a dime a dozen. all the upper parts are the same but the lower steel parts are slightly ...

Ad

Question about 1999 Explorer

1 Answer

replace rear main seal in 99 ford explorer? THE REAR MAIN IS WHAT IS CALLED A FULL CIRCLE SEAL, SO YES THE TRANS AND FLYWHEEL MUST BE REMOVED, U WILL ALSO NEED THE SPECIAL FORD SEAL INSTALLER, WITHOUT

Ad

...the rear main seal on the engine, it is best if you replace the front transmission seal at the same time if possible. Installation varies on different vehicles but the principles are the

...replace the rear main seal u have to pull the transmission out to access it, u will need a special seal installer tool to install the new rear main "full circle seal", it u don't use the special ford ...

Question about 1999 Windstar

1 Answer

front seal leak i need to replace the front main seal how difficult is this sell it. I have worked on those before. that was not one of ford's better ideas.

...F350 7.5L gas engine to replace the Rear main seal in the motor? What is the procedure? Yes, as the rear main is directly in front of the tranny. The procedure is involved...best to do a web

Question about 1996 F250 Crew Cab

1 Answer

...rear main seal appears to be leaking in my 2002 Ford Windstar with 114,000 miles. How difficult is this to fix and approximate cost of repair? the cost of repair is approximately 700 to 1000 dollars ...

its a big job. 5hrs labor if they know what they are doing. also replace rngine rear seal at the same time since the tranny is out. its only $30 extra so why chance having to remove the tranny again :

...rear main seal, if either of these are leaking the oil will be coming from the center of the engine above the oil pan. There are 2 1 in front and 1 in back of the engine. Rate my ...

seal so what is the part number for a 2000 ford windstar v6 3.8L. my mechanic is quoting me $350 for part and total for part and labor about $855. his rate per hour is $90 labor. seems a little pricey

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...