Questions & Answers for: bent door Microwave Ovens

...door has gotten bent or warped (maybe you rested something heavy on it?), you need to remove the door, disassemble it, and straighten it. You can lift most oven doors off of their hinges by opening ...

...door on Sharp R-5H84 microwave . Push button and can pull the door open with a slight amount of force. Sounds like a portion of the release knob is worn or broken, or a metal piece behind it is

...- doesn't always respond well Pushing on the lever doesn't always open the door immediately You will have to take the unit apart and see the reason. Could be a warn button or a bent

...bent/broke the left door latch after hitting it with my elbow when the door was open. I could bend the broken piece back in place enough to shut the door, but then when shut the light comes/stays on ...

...bent to sense door closure. Take apart the microwave and re-bent this switch tab...it's relatively easy to find and correct. The door switch might be bad too...won't cost much. 9 times out of 10 it's ...

...door.If it is bent the switch will not make contact with the door hooks. Place a dab of lithium grease on the tip of the door hooks to ease closing the door. This is the cause of the bent switch ...

...a small dab of lithium grease to the tips of the door hooks. You might also have to adt. the door latch switch assembly inside the oven as it could be bent out of shape from the hard to close

door is bent, the interlock switch is not in the right position and the oven does not think that the door is closed. There is not usually an adjustment on the interlock stud. You might try to re-align

...oven. It's doubtful that it's supposed to work that way. For safety's sake, Id take it in for repair. William, sounds like a faulty/ bent door hinge, discontinue use, have repaired or

...to do The oven worked perfectly well yesterday and after removing the cooked items I pushed the door to close, but light stayed on and door has not closed properly. Possible broken/bent door