Questions & Answers for: Nissan bent door

...door open bent, how do you fix/replace it? The drivers door mechanism that holds the door open so that you don't crunch your fingers or bonks you in the head when you get out has oddly been bent. How ...

...door handle, which is now bent upwards. I have removed the interior door panel but cannot see how to remove the door handle for repair. Any assistance would be appreciated. The door handle is held in ...

...harder the last time I purchased fuel. I'm thinking minor...hopefully it won't turn into a major issue at the dealership. more likely based on my experience is the latch is bent at the fuel

All other doors are fine, but this one is causing problems. Either it has rusted up or the mechcanisim has been bent,take door panel off check it out if rusted use some wd40 work lock untill it moves

...bent to break the inside of the door lock. There is plastic that encompasses parts of the lock that is causing the problem (the lock internals spread open and wear) this is where I start breaking the ...

bent pins from opening the door to far i have the same problem but its not the hinge there is a part there that slides into the door that binds on mine. when i unbolted that the door worked fine. I do

...cables and i still can not get the door to open need to know how I can open the door to fix my cable neither one of my cables will open my door. something may be bent inside the door causng it to ...

...bent on the end and release the door lock, then have to strip out door to see why won't open, probaly linkage has come loose Yes linkage. Probably plastic retainer for linkage has got brittle and ...

manual door lock malfunctioning The left rare door is not getting closed completely. cHECK THE HINGES,COULD BE LOOSE OR BENT.

...bent and fed through the door handle opening, feeling for the right spot and pull upwards, as long as the doors aren't locked. if locked, same idea feeding the coat hangar between the window and door ...