Questions & Answers for: Chevrolet bent door

Question about 2004 Express

1 Answer

...door may not close correctly because the hinge may be slightly bent. Keep all other hinges well lubed especially during the winter months when the hinges can be exposed to road salt. Fixing a bent ...

Ad

Question about 2006 Uplander

1 Answer

...door it moves just fine. Trouble happened at a carwash as far as I could tell Nick Check for a bent arm, pos. was bent by scruber.  Or was it on during the wash? it may have been stuck at one ...

Ad

...door will not open all my power locks work, i can hear the lock in the door like it wants to open but it does't sounds like someone may have tried to slim jim door either knocked of lock rod or

...door also the support beam or frame is bent what do i do The doors are not a big problem, you can get them in a scrap yard, afew bolts and they are done. Your big problem is the bent structure. That ...

...door panel on an 86 blazer s10? Get a hanger cut the long part of the hanger, bent the very tip about an 1/8" of an inch at 90 deg, the tip you bent hit it with a hammer so that it's some what flat, ...

...bent the end of it about 1/16", turn window handle where it points down, push back on door panel, there will be a clip (silver) on the back side of handle, with hanger pull up on clip to remove it, ...

Question about 2007 Tahoe

1 Answer

...seems a little new, but wires do tend to break inside or close to the door hinges, because they are always getting bent when the door opens and closes.. odd in a newer vehicle but the place to ...

Question about 2006 Silverado 3500

1 Answer

door frame is bent or rusted and jams the window. I've seen rust ballooning the metal before and causing this, and as most cars/trucks have rubber liners over the metal to prevent buffing the paint on

...damaged?? All the gaps look to be aligned (door to fender, hood to fender). Or could it be the K member what's bent?? Yes it most likely can be fixed but the cost is really high, thousands of

Question about 2004 TrailBlazer

1 Answer

bent inside the door. If once you unlock the door from the outside you can use the interior door handle to open the door, then you either have a bad lock unlock relay, or the door lock unlock actuator

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...