Questions & Answers for: Admiral bent door

hard as it appears. The second reason for leaking is damaged/bent (sprung) hinges that, when the door is closed/latched do not tightly seal the door against the gasket. Please report what you find, OK

bent, either in the door or on the front of the unit, where it latches. BOTH latching pieces must be 90° from the unit. If they are more, it won't latch. If they are less, it won't pull tight. If

...door switch, which when bad may not allow agitation or spin. Bare in mind the lid switch assembly can fail either mechanically or electrically. Check the clutch, brake assembly and transmission, one ...

bent into a "U" shape. When inserted into the test points for 5 to 10 seconds, the motor should start and the cycle will continue on its own. You may have to manually close the freezer door switch for