belt snapped looking for a picture where the pulleys are so i can see how to put this belt on. Its the one for the alternator.The other belt is still there and operational. I need to see how to take ...
freeing the belt from the compressor how? remove the belt with the help of a lever. first insert the lever between the belt and the compressor and then turn the belt so tat u can free the belt from ...
2005 Nissan Sentra 1.8S, with AC - how to replace belts? 2005 Nissan Sentra 1.8S, with AC. There are 2 belts: the narrow one (power steering...), and the wide one (alternator...) I was trying to ...
...e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them Again my apologies... Let me know if this helped, or if you have ...
replace belts/how to? replace belts Belts are the easiest thing to replace with a wrench, and a prybar. If you have a serpentine type belt, use a 1/2" breaker bar to relieve tension on the belt, ...
...timing belt is off, the car will not run at all. Need to know engine type to determine how many belts you have. For overheating issues, please see tip at ...
how do I remove the belt so I can remove the Water Pump? If you are referring to serpentine belt, Thisis how to do it. Lift the hood and prop it open. Find thelock nut on the serpentine belt and use a
i put a new alt. belt on my 2005 nissan sentra 1.8 and tighten the tenchner bolt and it bottom out and the belt is still loose just like the tenchner did not move. Compare the old belt to the new belt
timing belt when to replace Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing ...
...loose,turn pulley with hand to see if it turns freely,here's a link showing you how to replace the belts,first tighten pulley and see if noise
Usually answered in minutes!
798 Questions
708 Questions
716 Questions
570 Questions
508 Questions