Questions & Answers for: belt tensioner cavalier

...belt tensioner will not tighten how do i tighten the belt tensioner on a 1994 chev cavalier 2.2 litre engine? If the tensioner will not keep the belt tight then the tensioner is bad and will need to ...

belt tension how do you loosen belt tension on a 1997 chev. cavalier these belts are auto tensioned, if it has a problem the belt or the tensioner pulley are defective.

...belt tensioner on a 94 chevy cavalier,how does it remove from the aluminum plate it's attached too? i've tried 2 new belts and they keep slipping off,i'm guessing the tensioner is worn or bad. ...

...belt tensioner on a 1998 chev to change alternator where is the belt tensioner on a 1998 chev cavalier ? It is the center pulley. It is attached to the engine block through a short arm that holds the ...

belt tensioner on 92 chevy cavalier will not tighten belt tensioner is spring loaded if it not keeping belt tight u need to put a new tensioner on

...until it tightenc back up then keep pying the same direction (believe you are talikng about the tensioner)the tensioner should spring (move) back enough to slip belt over, lil tricky but you'll get ...

...belt tensioner, how do you set the tensioner so it will keep the belt tight? I loosened the bolt and got the belt tight, then i tested it and the belt loosened bck up thank you U do not loosen any ...

...tensioner and is not adjustable. If your belt is loose it is most likely that the tensioner has seized or the spring has broken and not keeping the belt tight. It will require the replacement of the ...

belt over the tensioner pulley while you have the auto-tensioner pulley bolt turned clockwise as far as it will go. Make sure that the belt is sitting centered in all the various pulley grooves on the

...belt tensioner replacement 1999 chevy cavalier 2 2 serpentine belt tensioner. Mounting bolt hits the frame before it clears the tensioner mount. forced the old one out but can't get the new tensioner ...