Questions & Answers for: Dodge Stratus belt tension

how do you get the timing belt over the tensioner ? I was trying all night. Trying to get the timing belt over the tensioner. I cant get it over the tensioner pulley. The belt is the same belt, I got ...

alternator belt I have an 01 stratus couple 3.0 liter.. My serpentine belt that powers my alternator slipped off.. how can I repair this? links or step by step instructions would be helpful.. i'm sure

...First there is a belt tension er tool you can buy. Second if you look at the tensioner there should be a square so you can place a 3/4 ratchet and pull to loosen the tension (long handle

...tension for the belt: 2005 Dodge Stratus sxt 2.4,dualoverhead,4cyl. GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner: A. Find the Tensioner(s). (See Diagrams on Link) B. Using a ...

...hand in there and put the wrench on the tensioner....you can loosen the tension and remove the belt. No special tool needed. I have a 97 and have replaced the belt and several other parts on my

change alternater. how do I lossen serpen tine belt to get to alternater There is a spring loaded tensioner on the belt line. You can put a wrrench or socket, usually 15mm, on the bolt and put ...

...engine Camshaft sprocket alignment-2.4L engine Timing belt installation-2.4L engine Timing belt tension adjustment-2.4L engine Timing belt tension verification-2.4L engine timing for mazda mpv ...

...tension on the belt while routing it. Continue routing it over the idler pulley keeping tension on it route it down and around the crank sprocket. Now set your tension pulley and replace the tension ...

...or loosen the belt tensioner and remove the belt.  Install new belt and check belt for proper tension. not quite that easy you can't get to the tensioner without about removing the

belt tension on a 1999 dodge stratus The belt tensioner is not adjustable. To loosen a tensioner you would swivel the belt tensioner away from the belt with a long flex wrench or ratchet and