Questions & Answers for: Chevrolet Silverado 1500 belt tension

Question about 2000 Silverado 1500

1 Answer

How to put on new AC comressor belt Help! We are trying to relace the belt for my husband's truck. Its a V8 Silverado 1500 2000 model. What is the trick to getting it on? We got it off and the ...

Ad

...tension on the belt. Remove the A/C belt from the pulleys. Slowly release the tension on the A/C belt tensioner. Remove the ratchet from the A/C belt tensioner. Clean and inspect the belt surfaces of ...

Ad

Question about 2000 Silverado 1500

1 Answer

...tension on the belt. Remove the A/C belt from the pulleys. Slowly release the tension on the A/C belt tensioner. Remove the ratchet from the A/C belt tensioner. Clean and inspect the belt surfaces of ...

...till you take the tension off the belt to slid it off one of the pulley so you can remove the belt. The ease back off on the belt tension to get your ratchet back out. Good luck and hope this

Question about 1999 Silverado 1500

1 Answer

...pulley that belt has a spring loaded tensioner, you will have to release the tension and re install the belt. Can pull the tensioner back with a wrench, slide the belt on then ease off of the ...

Question about 1999 Silverado 1500

1 Answer

...an auto tensioner that you buy and install if it's worn out. On v-type belts, you have altenator tension, power sterring tension and usually a/c tension to set. What year and style belt do you

Question about 2002 Silverado 1500

1 Answer

...belt squeaking If you check tension. If it is loose ..over 1/2" freeplay it is too loose. Tighten. If it feels tight. Then the belt is likely dried out and needs to be replaced... Check tensioner to ...

Question about 2007 Silverado 1500 2WD

2 Answers

belt tension has weakened. It occurs off and on, usually just off idle but sometimes at idle. Is there a common cause? common cause is the belt gets worn and stretched, yes the tensioner is suppose to

Question about 2001 Silverado 1500

3 Answers

tension is noisy the its possible that it locked up and that broke the belt. Do not replace the belt unless you replace the tensioner. Are any of the other pulleys noisy when you turn them by hand? IE

...any suggestions using the tension release bar to take the tension off the serpintine belt inorder to change the a/c belt and the tension is not releasing. It is just spinning try going the other ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...