Questions & Answers for: Chevrolet Astro belt tension

Question about 1998 Astro

1 Answer

...belt tension adjusting bolt, and the pump mounting bolt. Loosen the belt tension until the belt can be removed. On some cars, it is necessary to lift the vehicle on a hoist and gain access to the ...

Ad

Question about 2000 Astro

1 Answer

...go in reverse and drive sometimes. Somedays it is not so bad some days it is. the squealing is your belt, either tighten it, or replace it (I would replace it as it has already lost allot of ...

Ad

...belt needs to be tightend, if its not at the proper tension it will squeak at low speeds, especially when you first start your vehicle, and if you turn on your ac. it can be one of 2 things, its ...

How do I replace the belt tensioner pulley on my 1994 Astro van with no air conditioning? Is the pulley bolt left hand threaded? You don't need to remove any parts. Locate the belt tensioner and ...

Question about 1994 Astro

1 Answer

i have a 94 chevy astro van i cant take off the alternator i already took off the 2 bolts and the band its kind of loose but it still doesnt come off Loosen the belt tension via the tensioner

...belt is tight ? It might be the tensioner. The tension wheel shouldn't have any play at all. If you can grab it and move it slightly? It is bad . If its tight. Take the belt off and try all the ...

i need to remove an alternator to replace it how do i get the fan belt off how do i do that? YOU NEED TO REMOVE COOLANT FAN SHROUD AND YOU NEED 1/2 INCH BREAK BAR TO ROTATE TENSIONER TO REMOVE BELT. ...

I have a 1989 astro van 4.3l L and my automatic belt tensioner is to tight. I've installed a new belt and after a month. The tensioner is now close to the all the way to the stop position. What is ...

...belt (to relieve tension) and holding the tensioner in this position as the belt is slipped from its pulley. The tensioner arm contains a machined receiver for a 3 / 8 in. driver from a ratchet or ...

how do i put a belt on 2005 chevy astro van 4.3 If you are speaking of the main serpentine belt, a tool must be used to turn the belt tensioner against its spring tension thus making the belt loose.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...