Questions & Answers for: Chrysler belt tension

Question about Chrysler

1 Answer

...tension of spring on tensioner. Remove pivot bolt, tensioner, and spring from front cover. Insert spring into the USED belt position on tensioner bracket (Fig. 4). Install spring, tensioner bracket, ...

Ad

...down. Do you have any pointers to help? YOU CAN ALSO USE A 19MM OPEN END WRENCH ON OPPOSITE END OF TENSIONER TO TAKE TENSION OFF OF BELT..BE CAREFUL THOUGH..ALOT OF TENSION ON BELT..I HOPE THIS ...

Ad

Question about 1994 LeBaron

2 Answers

...tension suplied from the belt tensioner is what keeps it in place. Check the belt while you have it off. There is no better time to replace a worn or damaged belt then when its off while changing the ...

1999 sebring serpintine belt installation My sincere apologies for the severly delayed response. I am personally going back to answer your unanswered questions. I do not know if you still need this ...

Ho is the power steering belt on 2002 chrysler How is the power steering belt on 2002 chrysler sebring changed Click on the following direct Link. It has the Belt Diagrams you will need, complete with

Question about 2002 Sebring

2 Answers

tension off the belt tensioner (a breaker bar or rachet and the proper size socket with a pipe to give ya more leverage should work) and pull the belt while the tensioner is pulled away from the belt.

Question about 2002 Sebring

1 Answer

...belt tension. To remove or install this belt: Raise the front of the vehicle and safely support on jackstands. Remove the right front splash shield. Release tension of the belt by rotating the ...

Question about 2001 PT Cruiser

1 Answer

tension on the belt with your finger to keep the belt from coming out of the grooves while you are turning the tensioner. Pull the tensioner as far as it will go. Then pull the belt over the tensioner

tension is correct when the plunger pin can be removed and replaced easily. Rotate the crankshaft two revolutions clockwise and recheck the timing marks. Check to be sure the tensioner plunger pin can

...belt tension by tightening adjusting screw. Torque pulley nut to 54 N•m (40 ft. lbs.) after adjustment. The Poly-V generator/power steering belt has an adjustable tensioner pulley located on the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...