belt stops when I get on it Treadmill belt stops when I get on it. I took the cover off and watched the motor. When the belt stops, the motor and pulley keeps moving but the front roller stops BUT the
...stopping walking belt-look at front roller while doing this-if walking belt slips around frt roller, its the walking belt loose. at each corner there is an adjustment,with proper allen wrench, turn ...
Question about Sport 1000 Folding Treadmill PFTL91205 - !
when weight is put on belt it stops. works fine by itself at all speeds If you can stop the belt. You need to be aware that both running & drive belts can cause the same problem so I suggest that ...
how do I tell if the squeeling is the belt or the tensioner?????? Spray a little of belt dressing on the belt to stop the squealing or just change the belt. You change the belt to see if that stops ...
my pro form 380 stops while I am walking Either the walk belt is loose or the front roller pully has spun. In order to determine which one, you need to remove the moter cover and watch the drive belt ...
While using my Nordictrack a2550 this morning, the walking belt began to slip very badly. I checked the alignment and adjusted the tension of the belt as per the user's manual but the belt stills slip
my belt squeals at startup for a few seconds and then stops. How do I stop this? You can either adjust tension of belt (tighten) or replace belt or belt tensioner. Seeing how we have no information on
Question about R60 SoftStrider Treadmill
Healthrirer r60 the belt just stops when using it. Healthrirer r60 the belt just stops when using it, step off the belt it will start up till I get back on, then it stops again. what can I do to fix ?
2002 town & country limited 3.8L. Belts will 2002 town & country limited 3.8L. Belts will squeal when I turn on the a/c or heat, then stops until you put in drive then starts again. It will stop ...
Question about R60 SoftStrider Treadmill
...for a couple of minutes then the belt stops again. check adjust belt tension may have to clean under belt area as there could be a build up that is stopping the free movement of the belt as it gets ...
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions