Questions & Answers for: Ford Focus belt sensor

belt break a wire to the sensor or break the sensor when it came off. If it is your serpentine belt, it could be you ran your battery down since your alternator would not be working. Try jump starting

belt plugs wires coil crank sensor still wont start Check to see if you have spark/fuel. If you don't have one or the other, you most likely have a bad crank sensor (spark), bad cam sensor (fuel), bad

sensor cleaned. I have done 200 miles since and the fault has not come back but the lack of power still exists. Many thanks Kev It could be the timing is one tooth off of the correct setting. Have the

sensor timing,the timing belt may need to be changed,do not start the car anymore until the timing cover is removed to see if the timing belt is in line with the crankshaft.The timing belt maybe ready

...covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine ...

...switch? The passenger air bag is turned on or off with sensors in the passenger seat and the seat belt. The sensors disable the passenger air bag if the seat is unocupied or if a car seat or

...sensor and took off my belt and alternator but cant find it. any ideas on whats wrong with this pos?????????? Because you have done so many repairs already I would most likely say that the gauge is ...

...yet failed completely but is loose due to stretch will often trigger a camshaft position sensor fault code and cause rough running near idle. Once the belt fails of course the engine will not

...belt and water pump. threw a p171 code so replaced the egr valve and dpfe. then code for cataylitic converter, found the old one punched out so replaced it and pre cat o2 sensor. runs great for a few ...

...Sensor Circuit Low Input .take your pick first readings ford second set universal readings ...clear codes and see what happens but if quadro is coming on and going off then i suspect something wrong ...