Questions & Answers for: Ricoh belt sensor

Question about Aficio 2022 All-In-One Laser Printer

1 Answer

...belt cleaning sensor signal remains LOW. ? When the belt cleaning section releases from the image transfer belt, but the belt cleaning sensor remains HIGH. ? Dirty Sensor ? Defective sensor ? ...

Ad

Question about Aficio SP C410DN Laser Printer

1 Answer

...belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates. ? Dirty transfer belt contact sensor ? Defective transfer belt contact motor ? Disconnected ...

Ad

sc-405 code again. that is a transfer belt error. transfer belt not moving away from the drum during ID sensor pattern check.possible main motor/ drive malfunction, trans. belt position sensor problem

...belt position sensor error The transfer belt position sensor does not activate even if the transfer belt contact clutch has been switched on twice and rotated once. Pls check if Main motor/drive, ...

Question about Aficio 450 Copier

2 Answers

...belt position sensor error -Definition- The transfer belt position sensor does not activate even if the transfer belt clutch has rotated once. - Possible causes - ? Main motor/drive malfunction ? ...

Question about Aficio 1224C Black and White Copier

1 Answer

...belt and a sensor to detect the mark to make sure that the belt is turning around. The problem could be if the sensor is dirty, the belt is dirty, belt is out of position or damaged(torn), or worst ...

belt mark sensor signal does not change for 120 milliseconds. ? Defective main motor ? Image transfer belt out of position ? Belt mark blurred or absent I would remove the pcu unit (3 screws)and check

Question about Aficio Mp C2500 Color Laser - Printer / Copier / Scanner

1 Answer

belt contact sensor located? I need to clean the sensor to clear the error code. Open right door. Density sensors (5) are located above the transfer belt behind the black plastic cover. Use a damp rag

Question about Aficio Mp C2500 Color Laser - Printer / Copier / Scanner

1 Answer

...Sensor Error Belt centering sensor connector loose, broken, defective or Belt centering sensor defective. Also: To ensure that the ITB Cleaning Blade always touches the ITB at the correct angle the ...

Question about Aficio Mp C2500 Color Laser - Printer / Copier / Scanner

1 Answer

...Belt) Unit: Contact Position Error The ITB contact sensor does not detect the contact position of the ITB for 5 seconds after the ITB unit has moved to the contact position. ITB (Image Transfer Belt) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment and Supply Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...