Questions & Answers for: Dodge belt sensor

Question about 1996 Caravan

1 Answer

...sensor my serpatene belt broke.its getting gas its got spark.after putting on the new belt.but the engine wont turn over.what do i try next.i spent three hours trying to find the crank sensor.even ...

Ad

belt, tensioner 2003 Dodge Neon. Check engine light is on, trouble code P0016 (Cam-Crankshaft Position Sensor A bank 1). Have replaced Camshaft and Crankshaft position sensors, Light was still on. 70K

Ad

Question about 1996 Stratus

1 Answer

sensor....that is alot of money for a water pump and belt. your car came with either a 2.5 litrev6 or 2.4 litre 4 cylinder. the v6 is expensive to put the belt,but not the 4 cylinder.depending on when

Question about 1996 Intrepid

1 Answer

...check the belt on a 3.5 is to pull the cam sensor out take a flashlight shine it down in the hole and have someone turn it over. u should see it turning if you don't the timing belt is broke. good ...

Question about 1995 Intrepid

1 Answer

...check the belt on a 3.5 is to pull the cam sensor out take a flashlight shine it down in the hole and have someone turn it over. u should see it turning if you don't the timing belt is broke. good ...

Question about 1995 Intrepid

1 Answer

...belt was damaged, by unplugging the cam sensor will the motor run ? We had it checked by a mechanic and a code appear stating that the cam sensor was damaged. We had it changed but the car still ...

Question about 1987 Colt Vista Wagon

1 Answer

...belt and aligned the markers perfectly, car started fine, put the rest of the pulleys and belts back on and car will not start! put gas in tank just in case, tried to jump it, nothing is working and ...

...sensor. I have the belt on and the crankshaft is in the piston up position. Not sure if I need to take the belt off and lower the piston so I will wait for some answers before I try anything else ...

...sensor , turn the engine over and if the camshaft is turning , it is not a timing belt However if the engine has not had a timing belt changed (requirement at 60K miles) It would be a good move to ...

Question about 2005 Neon

1 Answer

...Sometimes and in some models, low battery voltage or a weak starter can can trigger a Camshaft Position Sensor code, also a loose worn cam belt can cause this code. Has the belt ever been

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...