Questions & Answers for: Canon belt sensor

...sensor error message. E021. Transfer Belt Cleaner Contanct/ Rease Problem. Cleaner pressure flapper solenoid, Belt cleaner detect sensor, engine PCB. call the company that you bought you Fit

...belt home position sensor is faulty. Condition 0001 The knurled belt motor does not return to home position when the knurled belt motor is driven for 1 sec or more. 0002 The knurled belt does not ...

...belt has failed once. ITB home position sensor B and ITB home position sensor A must occur alternately; however, the same state has been detected continuously. Turn off the main power, and check the ...

...belt that the sensor sees on each rotation. The patches could be dirty, the sensor could be dirty, the transfer belt could be damaged, and in some cases the transfer cleaning assy could be at fault. ...

...along with the ITB cleaning blade. In error, the 0002 means that second sensor cant read the Itb belt. As first aid, you can clean the back of the Itb belt and the driving roller. Hope that

- Image Transfer Belt. Probable cause can be fault on HP detection sensor or on drive rollers of ITB belt. How ever, the ITB belt needs to be removed and inspected/fixed. Call service! Hope that helps

...Belt Sensor (PS51) output in I/O mode. If sensor state does not change when blocked and unblocked, suspect a bad sensor.Service Mode  * 2/8 *Copier>I/O>DC-CON>P014>BIT-7 0=Blocked ...

E000007-0001 Fixing belt deviation trouble (trouble in top belt displacement or in belt deviation sensor). Replace the fixing unit.

...belt displacement sensor fault.) 0002: Lower belt displacement fault. (Either the lower belt full displacement or the belt displacement sensor fault.) 0101: Upper belt HP detection error. 0102: Lower ...

...belt position sensor 1, 2 (PS71, 72) and the sensor flag A. In case that both sensors are blocked from light A-1. Faulty fixing belt unit -> replace the fixing belt unit A-2. Faulty fixing belt ...