...Belt/Disc Sander, Model BD4600. Even with a new SANDING belt, it slips or stops as soon as a piece of wood touches it. The yellow gear on the right changes the position of the belt on the roller, but ...
...belt sander my husband has a black & decker belt sander. it has a bag that catches dust. I am working on a project and would like to finish before he gets home. I had to change the sanding belt. The ...
Question about 361 3" X 24" Sander
...Belt Sander I have ordered and received a replacement belt for a Porter Cable Model 361 Type 6 belt sander 3X24. What is the trick to get the belt on? I can not get it around the driver gear and the ...
Belt Sander (BD4600). I've only used it for a little over a year to sand plastic; nothing else. The sanding belt is not slipping; the drive belt is not slipping. However, now even under light pressure
Question about DW433KT Heavy Duty 8 Amp 3 Inch By 21 Inch Variable Speed Belt Sander Kit With Dust Canister, Case, And Inversion/Sanding Frame
Belt Sander When I operate my belt sander, the belt rides off. I have engaged the lever to tighten the belt. Is there something else I need to do? All sander will have two adjustments. The first is to
Sander Belt keeps slipping off. My electric belt sander, belt keeps slipping off. What is the solution? what I would do is using compressed air clean the underside as best you can there might be a ...
Question about 9404 4'' x 24'' Belt Sander
...belt sander - the paper slips off Porter Cable 362 belt sander - the paper keeps slipping off and adjusting the tension doesn't seem to help - can you advise? there might be a buildup of sawdust in ...
...BELT SANDER On the side of the sander there is a black triangle shaped cover with 3 screws holding it in place. Remove the screws and you will see the drive belt and 2 pullies or gears. The belt will ...
Question about Makita 98462 9910 Belt Sander 120v 5.6a 50-60hz 3" X 18" - Used
belt sander runs until I put pressure on it I've taken off the cover and my drive belt is intact and doesn't seem stretched out or worn. but when I put pressure on the belt the motor runs fine but the
Question about Makita 98462 9910 Belt Sander 120v 5.6a 50-60hz 3" X 18" - Used
...Belt Sander Tracking Problems http://www.woodworkingtalk.com/f12/belt-sander-throwing-its-belt-2075 ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions