Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
belt with no improvement. I am planning on checking the torque spring to see if that helps but I was wondering if there was some other adjustments that I can perform to hopefully rectify the issue. My
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
...tension is the secong reason for belts to fail to stay on while mowing. To fix this problem you need the factory specs for belt tension and reccomendation on adjusting belt travel. Hope this helps ...
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
...belt keeps coming off. While trying to mow an acre the belt came off at least 4 times. Only got a quarter acre done. Make sure the belt is under good tension -- shouldn't be able to deflect the belt ...
...belt The NOT serviceable UN-TRUTH. Hydrostatic Transmission Fluid is actually 10W-50 synthetic motor oil (like mobil). Do not use hydraulic fluid or transmission fluid. Hydro static on most lawn ...
Question about 21 Hp 42" Deck, Ys 4500 Lawn Tractor
...coming from transmission but it's only when the mower has been used for bout 30 mins. If I mow the hill right when I start then I'm fine but if I do flat part then try hill won't climb it. I have to ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...keeps the belt tight, no matter what height the deck is. These pivot on a bush that can get badly slogged out. Release the tension from the belt and check the up and down play of the pivot. Sometimes ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions
