Questions & Answers for: behringer how to set

...set upwards. also the drivers from behringer are not signed! and could cause stability issue. you may want to do as i did and get a better unit, (about 20 bucks more) hope this info helps, good

behringer u-control UCA200 USB device. When I go to record, adobe doesn't sense my mic. Any solutions? Please include as much info as possible. Thanks. Check the input and output settings. Look in the

...i set a behringa 1832 fx mixer I have a behringer 1832fx mixer and have the manual that illustrates how to set up for a band and/or other instruments etc! is this is what your asking for? regards ...

...set this up as my main input device in protools? Early versions of Pro Tools do not support Behringer devices. The newly released Pro Tools 9 can be calibrated through the Pro Tool Aggregate I/O in ...

...set it up? Here's a link to the file download page from Behringer: http://www.behringer.com/EN/Support/U-Control-Downloads.aspxDown the list, you will see a link to "All Audio Software" -- this ...

Behringer Eurorack UB2442FX, and it is very clean, but some of the mic inputs stop working without warning. After I unplug and plug in those mic inputs, they work fine, but only to stop working again.

set for behringer vp1220 speakers It is best to start with the mark on the ep2500 directly up (12 o'clock position). Gradually increase the output on your mixing board (MAIN MIX) to get desired volume

...set up a behringer pmp 2000 How do you set up a pmp 2000 with the speakers and floor monitor and what size monitor speakers do you need http://www.behringer.com/EN/Products/PMP2000.aspx You will find ...

...Behringer PS400 in the set up if I'm using the Behringer B-1? Please help I'm a complete beginner Yes, you need the PS400 with the B-1. Alternatively, you can connect the mic to a mixer with built-in ...

how do i use my behringer nr300 what settings make my guitat sound good without all the feedback. I need to eliminate the hum, hiss, and feedback Hi Paul Here's the link to your user's manual. I hope ...