Questions & Answers for: Chevrolet Colorado bearings

the bearing the front wheel passenger side is shaking.what does this means? The hub assembly has gone bad. That'll cause your shaking.

wheel bearings & u-joint I have 2005 chey colorado Ls,roughly how long does it take to change the front wheel bearings both sides.?,also how much does one cost.?. u-joint,same questions on that. if ...

Rear axle bearing replacement How do I replace the inner and outer bearings on a rear axle of a 2006 Chevy Colorado, and adjust the endplay so it doesn't whine anymore? The truck has had a hard life ...

...0.25 mm 0.003-0.010 in Backlash (Preferred) 0.13-0.18 mm 0.005-0.007 in Pinion Bearing Preload, New Bearings 1.7-3.4 N·m 15-30 lb in Pinion Bearing Preload, Used Bearings 1.1-2.3 N·m 10-20 ...

Left front hub replacement 2WD. 2WD pickups don't have hubs. They have rotors with bearings. Once you have the brake assembly supported, remove nut from spindle. Be sure not to strip the threads on ...

...front drivers wheel is locked up i need to know what it is going to take to fix it it is the wheel bearings before you strip anything try jackingf the wheel up and undo the bleed nipple as sometimes ...

You will need to remove the axle nut and keeper then the rotor slides off towards you and the wheel bearings will come out with the rotor. Hello, you can remove the rotor but you can't replace the

...center nut on a 2005 colorado Yoke torque is 400 foot pounds. to crush the crush washer to seat the bearings,,, after the crush washer is seated i believe it 100 foot pounds,,use a little red lock ...

are still coming on. grab the top of the tyre and shake in in and out If it moves you will hear the bearings clunk adjust or replace the bearings there is to be no movement at all Take your truck back

What are torque specs for rod and main bearings on a 2005 Chevy colorado 4 cyl If no one on fixya gives you these specs, try a local library or any car parts store in their book reference section. God