Questions & Answers for: Chevrolet TrailBlazer battery fuse

...fuse link. when you replaced the battery, did you put back all the wires ? fuse links are connected directly to the battery positive terminal. check also the ignition switch, sounds like an accessory ...

...battery change out?? Under the back seat on the drivers side is a fuse panel. Fold the seat forward, remove the fuse block cover, and locate the HVAC fuses.They are 10 amp fuses, remove the fuses and ...

...fuse box, but nothing changed. Any suggestions? Replaced the 125A Mega Fuse ($10 from dealer). The fuse is outside the fuse box under the hood, under the connectors from the battery to the fuse

battery first? THE FUSE LINK TO ALTERNATOR. YOU HAVE TO DISCONNECT NEGATIVE BATTERY CABLE BUT FIRST TURN OFF RADIO BEFORE DISCONNECTING NEGATIVE BATTERY CABLE.TELL ME WHAT SIZE MEGA FUSE YOU REPLACING

...battery and fuse box the door buzz come on,but i try to crank it it will nit make sound. Only the horn blow and the head light don,t come on. What the problem? maybe you blew a fuse main fuse maybe ...

...battery is clean and tight. then check the fuse box only do this when the vehicle is swiced off, and spray some contact spray into the fuses a little on each fuse this may resolve the problem.I hope ...

how do I reset the PCM on a 04 chevy trailblazer I disconnected the battery, removed fuses 10 and 28 adjacent the battery and waited twenty minutes. I then hooked the battery back up reinstalled the ...

...fuse jumping off battery wrong. replaced mega fuse now it wont start. has bean idling low before this happened Putting reverse polarity to a battery will do more damage then blowing a fuse. Chances ...

...battery and a fuse blew, dont know which one but air conditioning, radio, windows, locks seats or alarm doesnt work. Check the Mega Fuse right next to the battery. Open the fuse box, it's right there ...

fuse box , if you left the battery hooked up because it was dead and changed the altenator or if you charged the battery with it connected there is a possibility that one of the main fuses for the ecm