Questions & Answers for: Jet battery charger

...battery charger was operating properly. The batteries got discharged and now the charges does not seem to come on. Operater manual states that 'if battery gets fully discharged the charger will not ...

...battery charger for my Jet 3 model #2904-24. My batteries will not charge up anymore. Bateries about 2 years old. Email address is [email protected]\r\n Thank you James Horton Hi. Try a google ...

...battery charge 20-24 volts. If you can try to find someone locally that has an offboard charger and borrow it for a few hours. Plug the offboard charger into the charger port under the front of the ...

i have a jet ultra3 wheel chair...the batteries went completely dead..I put in new batteries but now it wont charge...book says to call a tech if the batteries ever completely discharge..is there a ...

Battery will not charge. No power indications when charger is pluged in. If your charger light does not come on when you plug it into the wall, the charger may need to be replaced. If the controller ...

...charger output. You can pull the battery tray out or remove the base cover depending on model and put a digital voltmeter at the battery connector to test. Check the battery connections and plugs to ...

Chair dont take a charge Get new batteries If your batteries are 2-3 years old its time for new ones. You can check the output of the charger by using a digital voltmeter Set the meter to 200 vdc and ...

...battery and black on the other. Check to see what you get for voltage. If no voltage reverse the lead wire to the other posts. Once you get a reading of 20+ volts watch the meter and plug in the ...

...over night. Batteries did not charge Wall outlet bad? Charger not turned on/plugged in right? Something disconnected? Bad battery connection? Blown fuse in chair or charger? Bad battery or

...charger to one battery at a time. You can test the charger with the batteries disconnected and measuring the voltage on the wires you just took off the batteries. The voltage should be 28 volts or so ...