Questions & Answers for: Geo Prizm bat man

i need change gaskets for a geo prizm 1.6 1993 i need to install the head gaskets from a 1.6 geo prizm 93. how can i do that if it was me i would go to your local library and get my hands on a Haynes ...

this car had been sitting for some time before I bought it. I drove it around for about an hr. During this time I noticed a few prob. When the heat was on high it was making some strange noises. All ...

head light adjustment Head light shine very low, not down the road, only able to see approx. 20-30', also, need to change out the bulbs, very dim. Is this difficult to do it my self? no man on

how much coolant in a 1996 prizm well make sure it is premixed first,never add straight antifreeze thats not mixed,check to make sure its full in the radiator and the overfull canister has markings on

how to remove water pump on 1990 geo prizm old post this is covered in the FSM (factory service man.) and at alldata.com its 50 steps.+ no body here will type that out. see here http://www.fixkick.com

...(has books, tools and ASE classes under belt) ignition bad, spark plug wire bad, fuel pump, bad

...bat goes hot ,12v, if the switch on the lower left is bad (shorted) this is the SUSTAIN switch. pin 3 wiper off is 0v. if pin 3 is 12vdc wiper off(again key on) then the switch lower left is shorted ...

wont shift out of park thats a feature. called PARK LOCKOUT covered in the book called a FSM (factory serv. man) what is the question why? how does it work? how can i diagnose it? got tools? who can ...

from dead engine, do head lamps work? on a dead car, dead engine, all power comes from the main car battery. and all power feeds are fused. if fuses blow, no power to that feed. if the battery is dead

1993 Geo Prizm starter clicks & does not crank. Battery & Starter tested good & engine not seized. Could this be neutral safety switch? If so, how can I bypass or test it. Are you certain the starter ...