line that is plugged in to the base will become unuseable, if you pick up another phone that works the line will be dead and all you'll hair is static. No buttons on the base responds to anything (the
Question about TCX905 Cordless Accessory Handset and Charger Phone
...LINE base systems) against two line TCX9xxx base systems. Note: It seems the only real difference between the handsets in the "single line" and "dual line" models is the firmware version. If anybody ...
Question about TCX905 Cordless Accessory Handset and Charger Phone
...base says that the line is busy. Before, the handset 4200 was with the Gigaset 4000 who was the base. Now, the only one whor works is the Gigaset 4200 base. Can you help me? If you had a storm, and ...
...Line 2 stays lit on the base unit but not on hardwired phones. I can answer and call on that line from hardwired but not from the wireless phones. (line 1 works in all aspects on all phones) I tried ...
...line base unit phone. Line one flashes but does not ring or display caller. The other lines work fine. The handsets show no activity ie they don't even flash if a call comes in on line 1. I have ...
My Sony cordless handset doesn't work and displays "S/C Invalid". Place the handset in the base. Unplug the AC power adapter from the telephone base. Disconnect all the telephone lines from the ...
...base,, but when the phone line is connected it wont work ..What do u think is the problem? The battery in the handset could be bad . First I would test that the base unit is recieving dial tone by ...
...station. thats should at least make free the line. I hope when you replug the base station, the line will be free again. If not I'm afraid you have to use another base station, or give it in
Question about C300A2 C300A-2 C300A 2 Gigaset 2 Handset Cordle
...base where one of the bases plugs into phone line. Check power and check phone line plugged in properly. All other bases are just charging phones. ! Check radio base where one of the bases plugs into ...
Question about C300A2 C300A-2 C300A 2 Gigaset 2 Handset Cordle
...line check base unit . Check phone line is plugged into base and wall Check base unit has power going to it If it all looks ok try plugging a normal landline phone into the base unit locations phone ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions