Questions & Answers for: baracuda pool cleaner moving

Baracuda G3 zodiac Clings to bottom or sides moving slowly The cleaner clings to bottom of the pool or sides moving and oscillating but moving much slower than normal here is a link to the Technical ...

baracuda G4 won't clean whole pool. goes to a corner and stays baracuda G4 won't clean whole pool . reurns to a corner where a step meets bottom of pool. if i move it away it goes back to same spot ...

...cleaner and get it pulsing/moving strongly. Refer to the G4 manual for an illustration and explanation on how to do ...

...on your jet's you can get a dirveter for the jet that will push the water down the wall rather than out into the pool. Get these at your local pool store. Baracuda and Kreepy Krawlie both make

...Baracuda G3 moves very slowly then stops There are no blockages and the pressure is good Check your pool cleaners hose to make sure that it is not becoming tangled. Storing the hose in a coiled ...

Baracuda X7 stays at the deep end of the pool With these pool cleaners, there are several things that you can try to get your cleaner to move around your pool. Check to make sure the hose is long ...

...baracuda gets caught up in the corners of my pool constantly. What should I do? If these pool cleaners are getting stuck on corners or other obstacles, try these solutions. Try using Pool Pulse to ...

my baracuda g4 get lots of suction, there is a pulse and there is no debris. But, it doesn't move in the pool. It may be getting too much suction...I know it may sound wrong to you but try it.

I have brand new pool cleanerg2 baracuda great suction but just wont move , thinking what a waste of money too much suction cut back its stuck to floor