Questions & Answers for: baracuda pool cleaner

Baracuda Zippy Pool Cleaner hose tear I have a Zodiac Baracuda Zippy Pool Cleaner that works well but frequently I get a hose tear. Is there a problem with manufacture? I haven't seen any bulletins on

...Baracuda pool cleaner yesterday,but it just wants to stay on the deep end ,it rotates around when it reaches the center of the pool i have a 15x30 ft,pool can you tell me the problem thank you?my ...

...on your jet's you can get a dirveter for the jet that will push the water down the wall rather than out into the pool. Get these at your local pool store. Baracuda and Kreepy Krawlie both make

Baracuda X7 stays at the deep end of the pool With these pool cleaners, there are several things that you can try to get your cleaner to move around your pool. Check to make sure the hose is long ...

...pool cleaners. It has a detailed diagram of how the pool cleaner is put together (and taken apart). Here is a digital copy in case you need it! ...

...baracuda cleaner can be run with the pool cover on. In ground pool with steps. Much better if you have the hoses that sink, not float. The action of the hoses rubbing on the cover will affect where ...

...baracuda pool cleaner If your pool cleaner is losing suction, there are several things that you need to check. Check the diaphragm for damage. Make sure that you don't have air leaking into the ...

...baracuda pool cleaner stays in the deep end only what is the problem? If these pool cleaners are not going to one end of the pool, make sure that your hose is long enough and that is it is balanced ...

...baracuda apart and have no instructions on how to put it back together. Below is a copy of the users manual for these pool cleaners from the Zodiac website. It has detailed instructions and ...

baracuda pool cleaner only running for 4-5 seconds, then stop - suction 100% pool cleaner stops running as if losing suction.pump pressure normal, no bubbles indicating leak. take apart, then assemble