Questions & Answers for: bar stool swivel stuck Cars & Trucks

...swivel take a long bar and have some one stick it between the swivel and the a frame and press down this will loosen the swivel and the assembly should be loose now hold on to the assembly and have ...

Ad

bar and make a slight dent in the body just above the bolt.This is the one on the drivers side.Then use a swivel socket to remove the bolt.Not a socket on a universal joint but a swivel socket.It is a

Ad

bar as well this will help .If it has them big alloys on then will make it heavy as well ,although i wouldnt mind betting that the swivel joints are worn inside causing the heavy steering ,also inside

Question about 1998 Jimmy

1 Answer

...of it. Two 15mm bolts hold the start in place, but you will need to use a swivel socket to get on the front one, otherwise the bar will prevent its removal. Good Luck, and thanks for using

Question about 2007 Santa Fe Limited

1 Answer

remove the luggage racks If you are wanting to only remove the cross over bars, as most people do to improve fuel mileage...stand on a safe step stool...these bars are designed to slide forward and ...

bar and push against the tensioner is easier but be careful if it slips . ouch also some breaker bars with swivel ( I use craftsman small breaker,it's thin and will just fit) will just fit down in and

Question about 2006 Grand Vitara

1 Answer

? the treads on all bolts this engine are RHT, right hand thread bar stool: righty tighty; lefty loosy no engine, size stated, but this works. crank case? pan, bell, crank, head bolts. fly wheel? lots

Question about 2006 Grand Vitara

1 Answer

i have this jewel.(link) why not read first, then drive. why be uninformed,,,, or stranded? http://dashboardsymbols.com/the-symbols/ bar stool answer,(and accurate) its just and EPA BS lamp. ignore it

Question about 1992 F150 SuperCab

2 Answers

...leans in the front drivers corner Think of suspension as the bar stool that tilts the front spring could be weak or oppisite rear spring is sprung Have you tested the struts? Maybe time for a new

is on the operator guide lost? it tell you ! read it. it says, get it service, but if DIY, read the FSM and scan it. it means, in bar stool lingo, the puter brain is unhappy, get spock to mind meld it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...