Questions & Answers for: Zebra bar code printing

bar code with scanner make the pause test (press pause and turn on) press Pause , 5 sec. if print qualiti is ok and you dont see some lines across the print, the problem is not the printer. if you see

...Bar Code Labels I have a Zebra 24M Plus bar code printer that is about 2 months old. The printer skips bar code labels when it is printing. I have to blow air into it with an air compressor to clean ...

...bar code) per box and would like to 'turn off' the label cutting feature so the labels don't get mixed up. Any ideas? Thanks! Jason Snoeyink It probably explains how to do that in the instruction ...

i have a z4mplus and i have no know how to get it toprint bar codes, it prints text but no bar codes You are using a label design software? Label Matrix or Bartender software, are best.

...on my labels. i can see them on print preview but will not actually print out. all other text and bar codes print out fine Check the "Dithering" setting in the printer driver. Turning "Dithering"

bar code printer is only printing half of the label. The top half.thanks,dennis Some drivers adjust the length of the print area, regardless of the length of the label. Do calibrate the label and also

...Bar Code Font of Code 128. It prints the UCC-128 20 digit # all wrong. See attached. When we change the Map to BarCode Font of EAN Ucc-128 Barcode it prints fine. Do you know of this or any ...

bar code print both vertically and label is designed to print horizontal barcode and it appears as designed, however the label also contains a vertical barcode that overwrites data fields. The drivers

I cannot print from my mac to a ZM400 Zebra printer That is correct, you can try VM Windows. I would get a cheap laptop instead, as it is easier. Hope this helps!

zm400 media darkness settings get reset after printings lable from SAP The printer driver settings override the printer settings unless you tell the driver to use the printer settings. You can tell by