Questions & Answers for: Chevrolet Venture bank 1 sensor 2 1998

...bank 1 sensor 1) first check your fuses check the wiring to the sensor(the sensor is on the exhaust in front of the engine-open the hood and look down) if the fuses and the wiring look good replace ...

Ad

Question about 1998 Venture Cargo

1 Answer

97 chevy venture code p0140 where is o2 sensor, bank 1 sensor 2 and how do i replace it how do i change the o2 sensor?

Ad

Question about 2003 Venture Passanger

1 Answer

...Bank 1 Sensor 1 Hello dillonca: My name is Roger and I will help you. There should be two sensors. One in the exhaust manifold back by the firewall. This is sensor 1 bank one. The other is behind the ...

...my 2003 chevy ventue? Need a 7/8 open end wrench or a o2 sensor socket. Located in exhaust pipe. The one closest to the engine is Bank 1 Sensor 1. The ones located downstream and known as "Sensor

Question about 2002 Venture Passanger

1 Answer

...bank 1 Okay starting with the o2, bank 1 is the side 31 cylinder is, bank 2 is the other side that cylinder 2 is, your misfire could be a coil or sparkplug wire or sparkplug,if its been a while sence ...

Question about 2002 Venture Passanger

1 Answer

trouble code on a 1998 chevy venture p1133 whers it located at tks.. p1133 is 02 sensor, bank 1 sensor 1. thanks

Question about 2003 Venture Passanger

1 Answer

...BANK #1 SENSOR #2 WORKING SLOW.. VEHICLE NEEDS OXYGEN SENSOR BANK #1 SENSOR #2 REPLACEMENT.. (A SES LIGHT IS ON - NO RUNNING PROBLEMS) There should be an O2 sensor before and after the catalytic ...

Question about 2003 Venture Passanger

1 Answer

...Bank 1 harness is open or shorted . P0137 Rear Heated Oxygen Sensor Bank 1 harness is open or shorted . P0341 Camshaft position sensor harness or connectors (The sensor circuit is open or shorted) . ...

Question about 2003 Venture Passanger

1 Answer

...bank 1 and bank 2 sensors I have written a couple articles that cover subjects including oxygen sensors, oxygen sensor codes, and oxygen sensor locations.  I recommend that ...

...malfuction bank 1 sensor-1 where is it located? code po135-02 sensor heater circuit malfuction bank 1-sensor 1,where is it located? It's the oxygen sensor screwed into exhaust manifold on driver

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...