Questions & Answers for: Lincoln balance washer Welding Tools

Question about 1989 Town Car

1 Answer

...cover replacement i need to know how to replace the timing cover as well as removing the harmonic balancer which i believe needs to come off before i can start on the timing cover A standard ...

Ad

...ford ranger 2.9l v6 with a 2 piece drive shaft. i had to replace the u-joints and now it is out of balance. is there a way to balance it without going to a machine shop? thanks, rick no, when taken ...

Ad

...my shock is going bad but i am just not that sure can somebody give me an opinion Tires need to be balanced. Take it to a tire shop and ask them to balance all 4 wheels. Problem will be

2003 Lincoln LS has steering shimmy at 70 mph It's either: Out of alignment or Front tires are not properly balanced. Either way you should have it repaired by a mechanic soon. Your destroying your ...

Shaking in the steering wheel when going lower speeds. 20-70 km/h. Smooths out at higher speeds. Have your tire pressures checked, look for any bulges, bubbles, uneven wear. It may be a matter of ...

Question about 2001 Navigator

1 Answer

2000 Navigator Lincoln vibrates when driving Could be a number of things (i.e. tire out of balance, axle shaft balance, etc....) I'd start with getting the tires balanced. You may have lost a ...

...shimmering stops Probably warped rotors. Replace them and the pads. Possible a tire has lost its balance weight. Could just need to have the tires

after i took the bolt off the harmonic balancer and the washer came off the harmonic balancer still will not budge on my 2001 lincoln ls V-6 model what am i missing? You'll probably need to use a ...

Question about 1985 Town Car

1 Answer

...cover. The bolt was a main sealer for the waterrpump. Do I need a special tool to get the harmonic balancer pulley off? Yes, you need a harmonic balance puller, most bigger parts stores such as ...

...LS shaking when I reach 70 mph Its an Automatic, does not shake before 70 mph, tires are good and balanced tire seperation,,bent wheel,tire out of balance,,,very loose tie rod ends,,prob. a tire ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...