Questions & Answers for: LG balance washer Washing Machines

Ad

Question about WM-2277HW Front Load Washer

1 Answer

...balance my front loading LG washer, besides leveling it, is there a way to "test" run th espin cycle to insure proper balance? This type of thing should not be required. Front load washing machines ...

Ad

Question about WM-2277HW Front Load Washer

2 Answers

...washer. In the rear panel, the ball balance sensor is mounted onto the frame. If the tub spins too wildly, it will hit the ball balance sensor causing it to go UE. But if the back panel is pushed in ...

Ad

Question about WM-2277HW Front Load Washer

1 Answer

balance. ? The washer has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several

Question about WM-2277HW Front Load Washer

2 Answers

...balance it. Although the Washer has an imbalance detection and correction system but if still the problem persists then it means that it is due to control error and needs to replaced preferably by a ...

Question about WM1812C Front Load Washer

1 Answer

...again, it continued successfully because of the reduced off-balance. I'm not sure if there are other reasons that would cause the washer to turn off. This is the only one I have come across so

Question about WM-2277HW Front Load Washer

1 Answer

Front load LG Washer Model WM2487HWMA out of balance. Machine is perfectly level. How do I fix the balance? Maybe one of your damper hinge pins have popped out. See page 39

Question about WM-2277HW Front Load Washer

1 Answer

an ue code flashing Hello UE is an imbalance error which is displayed when either the load is small or the appliance is tilted. You can also check if the washer is balanced and try unplugging the ...

...balance. Washer will run fine with nothing in it, but as soon as you put some weight on the drum it will not work. I got the machine used, and it has never finished a cycle without doing the UE error ...

Question about WM2277H Front Load Washer

2 Answers

...washer pumps are independent items so it will be something other than the pump This sounds to me like an "out of balance event" where the clothing goes to one side of the tub and causes it to bang ...

...washer and dryer to sit on. If possible fasten the plywood to the existing floor. General tips mentioned above Balance the load Level the machine Inspect the water pump for a blockage Inspect the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...