Questions & Answers for: Kenmore balance washer Washing Machines

Question about 24032\24036 Top Load Washer

1 Answer

...correctly the tub will be off balance. Sometimes the Balance Ring loses it's fluid due to a crack or leak and the washer will spin off balance. THis requires a service tech to dissemble the

Ad

Question about 22422 Top Load Washer

1 Answer

...washer even...check your counter balance spring it hold the tub to base at rear of unit,,,and check your balance ring at the top of your wash basket its fill with water if cracked will cause this ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

balance after repair on 20722 kenmore washer I just replaced the coupler on my 20722 Kenmore washer and now the wacher goes out of balance when it goes into the spin mode. I open the lid and make sure

Question about 24032\24036 Top Load Washer

1 Answer

washer off balance what I did was just grab the part that cleans the clothes and gave it a good shake and rock. Then I balanced the washer on the feet, you will see four small circles on the botttom ...

...built onto to the tub, make sure thr balance ring is not damaged, It is normal for the tub to shake in the spin cycle with nothing in washer how do i find the balance ring on washer model #26892690

Question about 24032\24036 Top Load Washer

1 Answer

washer does not have an out of balance cut off switch. If the load is not balanced properly the tub could hit the cabinet sides. If the unit spins evenly while empty & out of balance while loaded,

Question about Elite Oasis 27052 Top Load Washer

1 Answer

washer goes thru cycle ok untill spin cycle gets error code out of balance, but machine not out of balance That is not to say that the drum is not out of balance. Try running it empty and see if it ...

Question about 24032\24036 Top Load Washer

1 Answer

What liquid is in.a ge washer balancing ring? I accidentally drilled a hole in balancing ring on GE washer. The liquid mostly drained out. I would like to just add more liquid and plug the hole but I ...

Question about 24032\24036 Top Load Washer

1 Answer

...a new hole in the frame and reconnect the spring.i've never seen a balance ring damaged.so this is the first thing i would check if washer is off ...

...washer is out of balance it is level but it is out of balance clothing is put in right no problems until now and water is in the bottom of the washer any ideas what I can do Hi, i think you have to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...