Questions & Answers for: balance washer Refrigerators

Ad

Question about Nexxt Premium WFMC6400UC Front Load Washer

2 Answers

...washer seems out of balance when spinning, even with no load. With a small load, it seems worse. The washer is only a few months old, but had to be torn apart and rebuilt because a ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

balance after repair on 20722 kenmore washer I just replaced the coupler on my 20722 Kenmore washer and now the wacher goes out of balance when it goes into the spin mode. I open the lid and make sure

Ad

Question about 24032\24036 Top Load Washer

1 Answer

...sure the washer was level with a balance, washer is balanced. Whats the problem? well there's a counter weight that could be loose or broke or the support hangers for the tub may be broke or

Question about 24032\24036 Top Load Washer

1 Answer

...washer cannot balance load top loader Maytag washer cannot keep load balanced. Washer shakes and moves acroos the floor. I have tipped the washer foreward as per balancing instructions. It seems ...

...built onto to the tub, make sure thr balance ring is not damaged, It is normal for the tub to shake in the spin cycle with nothing in washer how do i find the balance ring on washer model #26892690

Question about 24032\24036 Top Load Washer

1 Answer

washer does not have an out of balance cut off switch. If the load is not balanced properly the tub could hit the cabinet sides. If the unit spins evenly while empty & out of balance while loaded,

washer when out of balance happens. Your switch is bad.  You don't necessarily need the switch.  Snip the wires off either side of the switch and fuse them together with a wire connector

...washer keeps spinning off balance when I removed the front cover I noticed a red blinking light on the motor pannel Probably washer is smart enough to detect the out of balance. Try to distribute the ...

Question about GTWP1800DWW Top Load Washers

1 Answer

...balance the washer to keep it from wobbling on an unlevel floor? You can adjust the front feet of the washer to "level" it with the floor. Sorry I didn't quite understand your meaning. Hope you can ...

...to perform a generic search online for any information except I would recommend having a professional technician out to accurately balance your washer. This will help to avoid any future issues. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...