Questions & Answers for: balance washer Cars & Trucks

Question about 1989 Town Car

1 Answer

...cover replacement i need to know how to replace the timing cover as well as removing the harmonic balancer which i believe needs to come off before i can start on the timing cover A standard ...

Ad

...to TDC on No 1 cylinder, ensure crankshaft sprocket, camshaft sprocket, oil pump sprocket & balancer shaft sprocket timing marks lighned. Pls note: Timing marks on camshaft sprockets should ...

Ad

Hiwich timing mark I used to time the balancer shaft on a 99 honda accord with a 2.3L To Install: NOTE: Clean balancer belt drive pulley, timing belt pulleys and upper/lower timing cover prior to belt

Question about 1999 Century

1 Answer

...the right front tire assembly. Locate and remove the right splash shield. Remove the crankshaft balancer bolt and washer. (my note: you may need to remove the starter and lock the flexplate ...

Question about 1989 Delta 88

1 Answer

How do I install harmonic balancer? REMOVE CENTER BOLT ON BALANCER TO CRANKSHAFT. USING LARGE THREE WAY GEAR PULLER PLACE WASHER IN BOLT HOLE TO PREVENT DAMAGE PLACE PULLER OVER BALANCER HAND TIGHTEN ...

after i took the bolt off the harmonic balancer and the washer came off the harmonic balancer still will not budge on my 2001 lincoln ls V-6 model what am i missing? You'll probably need to use a ...

Should there be oil on the balancer bolt when it comes out? Replacing seal on timing chain cover. When I removed the balancer main bolt it was covered in oil. Ive removed other balancer bolts and ...

i cant get the harmonic balancer off is there a washer that needs to come off how do i get it off The washer is in front of the Balancer, should come off pretty easy from that point with a puller, ...

...washer basket. The balance ring allows smooth operation and prevents the washer from knocking or walking. It allows the washer to go into a full speed spin with a 5 lb. out-of-balance load and the ...

2002 Pontiac Montana. How to change my harmonic balancer? I already took my tire off for the harmonic bolt out and ready 2 screw undone but do I use the washer from the harmonic bolt now? To get it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...